Export measurements to CAD, print at a chosen scale, and split by area
Plans: all plans (including Free). No AI credits are used and there is no monthly limit.
What you can do
| Feature | Details |
|---|---|
| Export | DXF (R12), SIMA, JWW (Jw_cad 8) and CSV, converted to plane rectangular coordinates (zones I to XIX) |
| A4 or A3, portrait or landscape, at 1:500, 1:1,000, 1:2,500, 1:5,000 or as on screen, with a scale bar, sources and a notice | |
| Split by area | Divide the measured parcel into two parts of a chosen area (a calculation guide) |
Step 1: Measure the parcel
- Press "Measure" (📏) near the bottom left of the map.
- Choose "Area" and click the corners of the parcel in order (tap on a phone).
- Press "✓". The "Result" card appears with the area (sq m, tsubo, ha) and each side's length.
Step 2: Export
In "Drawing & print" on the card:
- Check "Plane rectangular zone". Leave it on "(auto)" normally; the zone is chosen from the parcel's position. In mainland Kyushu, Nagasaki Prefecture is Zone I and the rest is Zone II.
- Press "DXF", "SIMA", "JWW" or "CSV" to match your software. The file is saved.
The four formats
| Format | What it is | Software that can open it (examples) | When to use it |
|---|---|---|---|
| DXF | A drawing-exchange format that many CAD programs can read. It carries the parcel's lines, points and text | LibreCAD (free), Jw_cad, AutoCAD and other general CAD software | When you are not sure which format your CAD uses. If in doubt, choose this |
| SIMA | A coordinate-data format used in surveying and civil engineering. It carries point numbers and coordinates (X, Y) | Most survey software | When you hand the coordinates straight to survey software |
| JWW | A drawing file specific to Jw_cad. At a size where the whole parcel is visible right after opening, with the side lines, point numbers, side lengths and area | Jw_cad (free, Windows) | When you want to carry on working on the drawing in Jw_cad |
| CSV | A plain-text table: point number, coordinates, longitude and latitude, and the distance to the next point | Spreadsheet software such as Excel and Google Sheets | When you want to check the coordinates in a table or use them in calculations |
To open a JWW file you need Jw_cad (distributed free on its official website). Jw_cad runs on Windows.
Note: DXF, SIMA and JWW may be read differently depending on the version of your software. Please try one file first. We have confirmed that JWW opens in Jw_cad for Windows. The drawing is kept small (within a 150 mm by 60 mm frame) so that the whole parcel is visible right after opening. The actual scale is written in the text of the drawing; zoom in within Jw_cad to work on it. If it does not open, please use DXF.
Step 3: Print at a chosen scale
- Choose the paper (A4/A3), the orientation (landscape/portrait) and the scale (as on screen / 1:500 / 1:1,000 / 1:2,500 / 1:5,000).
- Press "Print". A print window opens (allow pop-ups if they are blocked).
- If the map is larger than the paper, only the part that fits is printed.
- The scale for "as on screen" is a guide.
Step 4: Split by area
- In "Split by area", enter the area of part A (sq m). It must be smaller than the whole area (the range is shown on the screen).
- Choose "Parallel to edge". Part A is on the side of the chosen edge.
- Press "Split". The areas of parts A and B are shown. "Show A on map" and "Show B on map" display each part, which you can then export or print as well.
Notes
Values for export, printing and splitting are measured on the map (reference only). They are not survey results and have no legal evidentiary value. Areas for fixing boundaries, subdivision or registration must be determined by a survey, for example by a licensed land and house surveyor.