Make a survey sketch (draft)
Plans: all plans (including Free). No AI credits are used and there is no monthly limit.
What you can do
From the measured parcel (the target) and the neighboring lots of the "Registry Map (Lot Numbers)" shown on the map, MAPRISE makes a draft survey sketch.
- On the drawing: the target's side lengths, point numbers and area; the lot numbers of the neighboring lots; a north arrow, a scale bar, sources and a notice
- Choose the paper (A4/A3) and the scale (auto/fixed), then open it for printing or save it as DXF
- Lots cut at map tile edges are joined and drawn as one parcel
Note: This is a draft. The registry map has no certifying power and does not show actual conditions or boundaries. A formal survey sketch is made by a licensed land and house surveyor through a field survey.
Where it works
It works only where the registry map is included. In some places, such as urban areas, there is no lot data. You can tell before pressing (see the steps below). You can also check coverage under "Registry Map (Lot Numbers)" in the layer catalog.
Steps
-
Measure the parcel ("Measure" → "Area" → click the corners → "✓"). See Export, print and split.
-
Look at "Survey sketch (draft)" in the "Result" card. The status is shown.
Display Meaning and what to do Registry map (lot numbers) is available here (N neighboring lots) You can make it as is The "Registry Map (Lot Numbers)" layer is off Press "Turn the layer on" Please zoom in / The area around the parcel is not in view Press "Show the parcel" (lot numbers appear at zoom 14 or more) Loading the registry map… Please wait a moment There is no registry map data around here Not included here. You cannot make the sketch, but you can still print or export the measured parcel with "Print" or DXF -
Choose "Paper" and "Scale" (auto / 1/100 to 1/5000).
-
Press "Open for printing" to open a print window, or "DXF" to save a CAD file (lot numbers are ASCII only; "番" becomes "-").
Reading the drawing
- The thick red line is the target, with side lengths (m) and point numbers.
- Thin lines are neighboring lots with their lot numbers. A lot with a dashed line and a light fill overlaps the target.
- North is the north of the plane rectangular system (the X axis), which can differ slightly from true north.
Notes
Dimensions and areas on the drawing are measured on the map (reference only). They are not survey results and cannot be used to fix boundaries or for registration.